Model
EBL 802 is professional on AA, AAA 9V NI-MH/NI-CD rechargeable battery.

Features:

• EBL-802 can charge 2 or 4 AA/AAA Ni-MH/Ni-CD batteries in pairs, and 1 or 2 pieces 9V Ni-MH/Ni-CD batteries individually.
• Controlled by MCU, and using -V pulse charging technology, prevent the charger from over-charge, over-discharge, over-current and over-heat.
• Can be applied to supplied voltage globally.

Specification:

• Input: 100-240V AC 50/60Hz
• Output: DC 2.4V 600-670mA for AA/AAA batteries, and for the 9V batteries, its 250mA when the voltage reach to 6-7V, 140mA when 8.4V, 30mA when 9.6V
• Battery saturation charging rate: >80%

Unique Trickle Charge
Adopting -V intellectual cut-off charging method, automatically turn to trickle charge, overheat-detection to prevent over-charging, short circuit protection and reverse polarity protection.

Attention:
* Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger.
* Never mix charge different type and different capacity of batteries under the same LED indicator.
* Using environment: 0 to 35, it is normal phenomenon that the battery is warmer than room temperature when charging.
* Do not disassemble or reassemble the charger by yourself for safety reason.

Environment Conditions:

• Operating Temp: 0-30, Humidity: 80
• Storage Temp: 0-25, Humidity: 60
• Surface Temp of batteries when charging: 60
• Surface Temp of charger when charging: 45

Note:

• This battery charger is used for AA/AAA Ni-MH/Ni-Cd batteries, and 9V Ni-MH/Ni-Cd batteries.
• The absolute 0V battery can not be charged.
• Can not charge alkaline or carbon battery.

Size: 3.94* 2.64* 1.65 inch
Weight 2.65 oz.

Package Includes:

• 1x EBL 802 Battery Charger
• 1x User Manual